How to Extend the Service Life of UV Weathering Test Chamber?

Nowadays, the use of UV accelerated aging test chambers is becoming more and more widespread, and a series of problems have arisen. Some people are not familiar with how to operate, so it is inevitable that some mistakes will be made during the operation. Such operation is very dangerous. Only by keeping in mind the precautions can you create a safe environment for yourself and other employees.

Before starting to use, you need to read the operating instructions and precautions. You must have a full understanding of the performance and function of the equipment and be familiar with the operation process of the equipment. In addition, you must check whether the equipment and the operation around the equipment are safe, whether the switch is properly placed, etc.

During the operation, the staff must be careful and always pay attention to the changes in the products in the high-temperature aging room to prevent a series of problems such as product deterioration or equipment damage caused by too long a time. More importantly, it is forbidden to test and store flammable, explosive, corrosive and volatile items.

After use, it is forbidden to wipe the switch, electrical socket, etc. with wet hands or wet cloth to prevent accidents such as electric shock. Moreover, the voltage used cannot exceed the power supply voltage. It is necessary to check whether the equipment is powered off, whether the surrounding equipment and environment are safe, and whether the items used are placed back to their original places. You can leave the room after various inspections.

Avoid blocking the air outlet and return air outlet when stacking products in the walk-in high-temperature aging room. The total volume of the test product should not be greater than 1/3 of the volume of the studio, so that the temperature cycle inside the test room will be more uniform.

The pressure controller is used to protect the compressor. Check the pressure controller regularly to see if it is sensitive to avoid major accidents.
Regularly observe the oil level, oil quality, pressure and frosting of the return air valve of the equipment compressor.
When the UV accelerated aging test chamber makes abnormal noise, it must be shut down and repaired in time.
It is forbidden to operate the compressor over the working condition and start it frequently. Otherwise, it will affect the service life of the compressor.
If the condenser is full of dust, the compressor high pressure will be high, which will affect the compressor.